This article has Open Peer Review reports available.
Regional health care planning: a methodology to cluster facilities using community utilization patterns
© Delamater et al.; licensee BioMed Central Ltd. 2013
Received: 1 April 2012
Accepted: 14 August 2013
Published: 22 August 2013
Community-based health care planning and regulation necessitates grouping facilities and areal units into regions of similar health care use. Limited research has explored the methodologies used in creating these regions. We offer a new methodology that clusters facilities based on similarities in patient utilization patterns and geographic location. Our case study focused on Hospital Groups in Michigan, the allocation units used for predicting future inpatient hospital bed demand in the state’s Bed Need Methodology. The scientific, practical, and political concerns that were considered throughout the formulation and development of the methodology are detailed.
The clustering methodology employs a 2-step K-means + Ward’s clustering algorithm to group hospitals. The final number of clusters is selected using a heuristic that integrates both a statistical-based measure of cluster fit and characteristics of the resulting Hospital Groups.
Using recent hospital utilization data, the clustering methodology identified 33 Hospital Groups in Michigan.
Despite being developed within the politically charged climate of Certificate of Need regulation, we have provided an objective, replicable, and sustainable methodology to create Hospital Groups. Because the methodology is built upon theoretically sound principles of clustering analysis and health care service utilization, it is highly transferable across applications and suitable for grouping facilities or areal units.
KeywordsHealth care utilization Hospital planning Certificate of need Clustering K-means Ward’s
Health care planning and regulation in the United States has generally attempted to achieve two broad goals: 1) promote public health by ensuring that the supply of services meets the population’s need and 2) contain health care costs by regulating the supply of services to a level congruent with the need of the population. Regulation is often enforced through state-level Certificate of Need (CON) programs, which attempt to enable a sufficient supply of service to meet the population’s health care needs without providing a large oversupply or duplication of services . CON programs require that proposals for additional health care services or facilities demonstrate an unmet need prior to approval. Although their merits have been questioned over the past 40 years (see [1–3]) and they are no longer federally mandated, 36 states in the US currently employ some form of CON program .
Health care services are used by people, but are supplied by health care professionals who deliver these services at hospitals, clinics, and other facilities. Although the demand for hospital services can be considered an attribute of people or populations, the supply only exists at hospitals. Further, the areal units used to aggregate populations rarely, if ever, contain residents who use a single health care facility . In an effort to enable community-based planning of health care resources, communities and/or hospitals are grouped to form regions of similar health care use. Thus, planning occurs at a regional level wherein the supply of health care resources available to the larger community are measured against the community’s need. In the US, 28 CON states predict or evaluate the relationship between hospital bed supply and demand , necessitating methods or techniques for grouping both population units and hospitals (e.g., [6–8]).
Very limited research emphasis has been placed on grouping or clustering hospitals based on similarity in community utilization patterns. Methods for clustering hospitals using multivariate data received attention from health services researchers in the 1970s and 1980s. These studies, however, were more focused on identifying hierarchical structure in the overall system of hospitals or identifying similarity among hospitals for determining reimbursement levels [9–13]. More recently, this research topic has been revived in response to changes in health care delivery and organization [14–16].
A review of the literature provides little guidance toward alternative or improved methods to group health care facilities. The branch of research most related to this particular problem is the creation of small areas. Yet, the methods used to create small areas have also received little attention . Although multiple methods have been proposed more recently to group communities into health service regions (e.g., [18–20]), they are extensions of the straightforward, yet unsophisticated, plurality method employed by Wennberg and the Dartmouth Atlas group .
Here, we present a new clustering methodology that groups hospitals based on similarity among their overall pattern of community utilization and geographic location. Despite being developed within the politically-charged atmosphere surrounding CON regulation, the methodology offers an objective, replicable, and sustainable solution for grouping hospitals. Importantly, the methodology uses generally accepted clustering techniques and can be easily transferred to group other types of health care facilities or to create small areas for health service studies. Further, the source code necessary to replicate our clustering methodology is provided to ensure that the specific techniques we employ are unambiguous.
The overall objective in most clustering analyses is to assign individual observations into natural groups or clusters. Jain (p. 652) states that the operational definition of clustering is:
Given a representation of n objects, find K groups based on a measure of similarity such that the similarities between objects in the same group are high while the similarities between objects in different groups are low.
A large majority of clustering algorithms can be described as either hierarchical or partitional in nature. Hierarchical algorithms use an n × n similarity matrix to recursively form nested clusters over all possible values of K. Partitional algorithms divide observations into a user-defined number of clusters and utilize an n × n similarity matrix or an n × m matrix of observations, where n observations have m attributes or data dimensions.
Applied cluster analysis requires the analyst to make a number of subjective decisions. Prior to clustering, the attributes (or variables) used to describe similarity among observations must be determined, a potentially subjective process . Additionally, a large number of clustering techniques exist, creating a “user’s dilemma” in the technique selection process . Finally, determining the number of clusters or groups, K, is one of the most difficult problems in cluster analysis [22, 24]. Milligan and Cooper  provide a comprehensive review of clustering and cluster analysis, offering a seven-step structure to guide the clustering process: 1) select the entities, 2) select attributes of similarity, 3) decision on data standardization, 4) select similarity measure, 5) select a clustering algorithm, 6) determine the number of clusters, and 7) evaluate and interpret the output clusters.
Our case study was conducted in 2011, during a substantial review of the methodologies contained within Michigan’s Hospital Bed (HB) Standards (see ). These Standards carry the power of law  and are used by the state’s CON Program to regulate the availability of hospital beds. In the HB Standards, the specific methodologies employed to define Subareas and calculate the necessary supply of hospital beds needed to meet the state’s future population demand (Bed Need Methodology) are detailed.
Michigan’s CON Commission assembled a Hospital Bed Standard Advisory Committee (HBSAC) in 2011 to explore potential modifications of the Bed Need Methodology. The HBSAC, in turn, formed a working group that was composed of various stakeholders in Michigan’s health care industry and was tasked with conducting a critical evaluation of the Thomas clustering methodology and providing alternative approaches if deemed necessary. The study authors participated in the HBSAC working group, providing scientific support throughout the process. In the following paragraphs, we detail a number of the practical and scientific concerns raised within the working group regarding the Thomas Methodology and the state’s Subareas. Although these concerns focus the Thomas Methodology and Michigan’s Subareas, they highlight the necessity to explore alternative approaches for clustering hospitals and the context in which our new methodology was developed.
Re-implementing the Thomas methodology, which includes an initial automated clustering method and a secondary step where the results are reviewed and modified by an expert panel, was also found to be problematic. Although a detailed description of the methodology is offered in Thomas et al.  and the Hospital Bed Standards , portions of the methodology remain cryptic. A similar problem was experienced by researchers at Michigan State University when tasked with implementing Michigan’s Bed Need Methodology (detailed in Langley et al. ). Therefore, the initial action required explicitly defining the Thomas Methodology (see Additional file 1) and implementing the methodology with up-to-date population and hospital utilization data. We used the R programming language and environment  to complete this task. However, only the clustering algorithm was implemented, given the lack of information regarding the scope and nature of modifications made to the Subareas via the expert panel.
The practical concerns identified in the Thomas Methodology induced a further exploration of the theoretical underpinnings of the methodology, including a robust analysis of the input data and overall approach to clustering. These are presented and discussed further in an effort to highlight the complex set of factors that are likely to arise in any clustering application (as detailed by Milligan and Cooper ). We focus on hospitals and the Thomas Methodology in particular; yet, the concepts presented are generalizable such that they are applicable for grouping any type of observations having geographic utilization data for attributes.
where P d i,j is the number patient days used by residents of areal unit j at hospital i and Pd j is the total number of patient days used by residents of areal unit j (at all hospitals) . An RI value can be calculated for every hospital and areal unit pair under consideration to form a RI matrix.
The set of RI values for a single hospital characterize the “importance” of that hospital to each of the areal units. Because the patient days in the denominator of Eq. 1 are the total of the areal unit, the measure is highly influenced by the size of the hospital (number of beds). Further, RI provides more pertinent information about the community’s utilization trends, rather than the hospital’s. For example, if 75% of population unit j’s hospital usage is supplied by hospital (R I i,j = 0.75), it is obvious that hospital i is very important to population unit j. However, what this value does not provide is information regarding the magnitude of population unit j’s contribution to hospital i’s overall patient distribution.
where P d i,j is the number patient days used by residents of areal unit j at hospital i and Pd i is the total number of patient days at hospital i (from all areal units) . Unlike RI, CI values are not overly influenced by the size of the hospital. As a result, CI values provide a characterization of utilization patterns that are directly comparable among hospitals; further, past research has employed CI-based utilization patterns to identify hospital-based geographic service areas (e.g., [37–39]).
RI and CI both provide salient information about hospital utilization patterns. Yet, the differences are apparent when attempting to characterize the geographic distribution of a hospital’s patient base for comparative purposes. As Figures 4 and 5 illustrate, the two example hospitals draw nearly the same proportions of their overall patient population from the exact same areal units (the hospitals’ CI values closely follow the 1:1 line); specifically, the hospitals have highly similar geographic footprints within the region. The Pearson’s correlation coefficient (r) of the hospitals’ CI values confirms the similarity, showing nearly perfect correlation (r = 0.975). Although correlation is also high between the hospitals’ RI values (r = 0.855), the similarity in community utilization patterns is not nearly as apparent due to the differences in magnitude of the RI values (which are heavily dependent upon the number of beds at each facility). The RMSE (Root Mean Squared Error) between the hospitals’ sets of CI values (0.0018) is an order of magnitude less than RMSE of the RI values (0.0227), confirming these large differences.
In the Thomas Methodology, clusters are formed via an evaluation of the proportion of patient visits originating in “home areal units” (expressed as RI values). A hospital’s home areal unit is assumed to be the geographic region in which the hospital is locateda. The approach to clustering can be simplified as such: if Hospital A (located in Unit A) provides a small proportion of the hospitalizations for Unit A (it has a low RI value), Hospital A will be grouped with the hospital having the highest RI value in Unit A. This process continues iteratively, in a watershed-type fashion, until specific user-supplied thresholds are reached.
Three major theoretical shortcomings permeate this approach to clustering hospitals. The first is the assumption that similarity among hospitals can be adequately assessed based on RI values in a single areal unit. As Figure 4 demonstrates, a hospital’s patient base is highly likely to be distributed throughout a region and not confined to a single areal unit. Considering whether to cluster hospitals based solely on the overlap in a single areal unit largely ignores where the “rest” of the hospitals’ patients originate. Specifically, the overall geographic distribution of hospital utilization is not evaluated in this procedure; similarity among hospitals is reduced to an evaluation of whether one hospital draws a specific (user-defined) proportion of patients from the home areal unit of another hospital.
The Thomas Methodology’s definition of home areal units is the second theoretical shortcoming. The methodology assigns a single home areal unit for a “group” of hospitals once they have been clustered. Specifically, the home areal unit of the entire cluster is designated as the home areal unit of a single cluster member hospital. Because the methodology further clusters these groups based on overlap within this single home areal unit, it does not acknowledge that the cluster contains multiple hospitals. This has the potential to result in scenarios where hospitals grouped into the same Subarea may share little to no similarity. For example:
Hospital A is clustered with Hospital B based on Hospital B’s RI in Hospital A’s home areal unit.
Once the hospitals are clustered to form Cluster AB, the home areal unit is assigned as Hospital B’s home areal unit.
When Cluster AB is further clustered with Hospital C, the criteria for clustering is based on Hospital C’s RI value in Cluster AB’s home areal unit. Because Cluster AB’s home areal unit is defined as Hospital B’s home areal unit alone, utilization within Hospital A’s home areal unit is not considered.
In this scenario, Hospital C and Hospital A may share little or no similarity in the newly formed Cluster ABC. Because the Thomas Methodology iterates until there is little overlap among home areal units, very large clusters (see Clusters #5 and #18 in Figure 3) or geographically discontinuous clusters (see Cluster #10 in Figure 3) may be created such that patient utilization patterns for hospitals on the periphery are dissimilar to those of the other cluster members.
The third theoretical shortcoming of the methodology is the use of subjective parameters (λ values for both single hospitals and hospital clusters) as the threshold level for determining whether hospitals should be clustered and as a “stopping point” of the clustering algorithm. Notably, in Thomas et al. , the authors state that the specific λ parameters were determined by running the algorithm with varying values until an acceptable cluster solution was reached. This method of parameter estimation is largely subjective, relying solely on the analyst’s interpretation of the appropriateness of the output clusters. As a result, the specific parameters are highly value-laden, without any general theoretical foundation or empirical justification for support.
Subjective modification by expert panel
In the Thomas Methodology, the Subareas provided by the automated clustering algorithm are passed along to an expert panel for modification. Thomas et al. (p. 46) state:
Based on members’ knowledge of hospital relationships and other factors influencing the reasonableness of proposed groupings, the committee is asked to decide whether the objectively determined clusters are in fact appropriate.... Thus the committee makes the final determination, using the patient origin data analysis as one important source of information.
Although this step offers the potential to incorporate useful qualitative or local knowledge into Subarea formulation, it also raises practical and theoretical concerns with regards to implementation. Allowing the Subareas to be modified post hoc adds another layer of subjectivity to the overall methodology, also providing an opportunity for the results to be “gerrymandered”, an unfortunate but important consideration in CON-related proceedings.
Our overall goal in creating the new methodology was that it employed methods and procedures that are as objective, replicable, and sustainable as possible. Considering the subjectivity present in many clustering applications and the vast number of possible clustering methods, we placed emphasis on examining higher-level theoretical issues, rather than specific application-oriented concerns. Milligan and Cooper’s 7-step structure for clustering was used for guidance throughout the process.
Preliminary work focused on the identification of measurable hospital characteristics that could be used to compare and cluster similar hospitals. Two characteristics were deemed as the most important, as they are directly related to the final use of the clusters within the Bed Need Methodology: 1) that hospitals draw their patients from a similar set communities and 2) that hospitals are geographically proximate.
Furthermore, the term Subarea was replaced with Hospital Group in the new methodology to better reflect the nature of and specific use of the units within the context of the overall Bed Need Methodology. Specifically, the use of Subarea as the term to describe a collection of hospitals erroneously denotes that the group represents an “areal” feature.
Overview of the new methodology
The new clustering methodology employs a 2-step K-means + Ward’s algorithm to create Michigan’s Hospital Groups. This algorithm compares observations across multiple attribute values, allowing for both community utilization patterns and hospital location to be evaluated simultaneously during cluster formation. Hence, the output clusters are groups of hospitals that 1) draw a similar proportion of their patient days from a similar set of communities and 2) are located near each other. Georeferenced hospitalization data and travel distance measurements among hospitals are required to implement the methodology.
The methodology also includes a heuristic to determine the number of Hospital Groups, K, based on statistical measures of cluster fit and characteristics of the Hospital Group solution. Further, we include a set of techniques to assign a new or proposed hospital to the existing Hospital Group solution in case this scenario arises.
The source code used to implement the overall methodology can be found in Additional file 2 b. We utilize the R programming language using only base package functions to allow for portability across operating systems. The code has also been modified slightly from the actual code used for Michigan in an effort to make it more generalizable and transferable across applications. In the following sections, we provide a detailed description of the clustering approach and the data and procedures required to implement the clustering methodology.
Clustering approach and attributes of similarity
The approach used in the new clustering methodology departs substantially from previous approaches for grouping hospitals and other health care facilities. Most notably, the new methodology does not require the delineation of clearly defined “service” or “market” areas for each facility or set of facilities. Service areas are required in these approaches as they employ some form of threshold value for clustering that is based on the overlap or market penetration within the areas. For example, the Thomas Methodology uses overlap within the home areal unit (defined by the RI values and λ parameter) to determine whether to cluster facilities (a similar approach is suggested in ). Other approaches (see ) choose a specific number of overlapping areal units among service areas to determine whether facilities should be clustered.
We do not consider a user-defined threshold of overlap within hospitals’ user-defined service areas to be a sufficient characterization of hospital similarity. On a conceptual level, both service areas and thresholds that determine a “groupable” amount of similarity are difficult to justify, given the subjective and arbitrary nature. Our new clustering methodology provides a more objective approach, by considering utilization throughout the entire study domain. To accomplish this, hospital similarity is based upon the overall geographic distribution of hospital’s total patient day population, represented by CI values. Because CI values are not overly sensitive to the size of a hospital, they provide a suitable metric for comparing any hospital under consideration. Further, by using the 2-step K-means + Ward’s algorithm, the new methodology is built upon a well-understand and accepted procedure to identify clusters when observations have multiple attribute values and similarity across all attributes is required.
The methodology requires georeferenced hospital utilization data. We employ data from the Michigan Inpatient Database (MIDB), a nearly exhaustive record of the state’s inpatient hospitalizations. Each patient record includes the discharging hospital, the zip code of the patient’s residence, patient demographic information, and diagnostic codes. Using the most recent three years of MIDB data, the number of patient days used at each hospital by residents of each Michigan zip code are arranged in an n × z origin-destination (OD) matrix. Three years of data are included to ensure that recent patterns of state-wide hospital utilization are captured without the fluctuations possible in a single year. All existing hospitals that reported their inpatient data to the MIDB for any portion of the three year period are included. In this, reporting is essentially universal throughout the state’s hospitals. The n × z matrix of patient days is converted to a CI matrix (for each hospital in n) using Eq. 2.
The geographic location of each hospital is represented as an 1 × n vector of the travel distances to the other hospitals in the state. When consolidated, this results in an n × n OD distance matrix. The use of an n-dimensional representation of location, in lieu of traditional 2-D locational attributes such as x,y geographic coordinates, is necessary to account for Michigan’s particular physical characteristics and transportation infrastructure. Most notably, Euclidean distance measurements may lead to misrepresentations of true distances among locations near shorelines. For example, using only x,y coordinates to define location, hospitals in Michigan’s “thumb” region (HSA 6) in Figure 1 would be considered near hospitals to their northwest, not accounting for the true magnitude of their land separation due to the Saginaw Bay. Distances among hospitals are calculated as travel distances on Michigan roads using a custom-built network model . After the n × n matrix is assembled, the distance entries are rescaled from 0 to 1 by dividing each by the maximum distance between any two hospitals. The rescaling process ensures that the range of values in the hospital utilization matrix and distance data matrix are similar [41, 42].
The utilization matrix and distance matrix are joined to form a final data matrix containing n rows or observations with m (z + n) attribute values per observation.
Therefore, given the input data for this application, the K-means algorithm attempts to minimize differences across m dimensions, evaluating the hospitals’ patient utilization patterns and geographic location simultaneously. The cluster centers produced by the algorithm represent the “central” location (in m dimensional space) of the cluster members’ hospitals. By minimizing J(C), the algorithm assigns hospitals having similar overall CI values and locational attributes into the same cluster, while also maximizing the “differences” between clusters.
Two distinct characteristics of the basic K-means solution provided concern for identifying Hospital Groups. First, solving Eq. 3 is an NP-hard problem , essentially rendering it non-computable for large problems in any acceptable amount of time. Thus, K-means implementations rely on a search algorithm to approximate the solution and likely provide locally optimal solutions, rather than the globally optimal solution [22, 45]. Second, due to the first concern, the basic K-means method employs a random initialization procedure for the search algorithm. Given that the input data were of high dimensionality and complexity, the resulting Hospital Group solution identified by the randomly initiated K-means algorithm would likely vary slightly between model runs. Therefore, the results would not be reproducible.
To examine the variability associated with the random initialization of K-means and for the presence of local optima, we initially grouped the hospitals into 50 clusters using 5,000 random starting locations. Although there were roughly 9 × 10203 possible solutionsc, the observed variability in the output cluster solutions was much higher than initially expected; each random start provided a unique 50 cluster solution.
Determining the number of hospital groups
As was discussed earlier, one of the more difficult problems facing any applied cluster analysis is determining the number of clusters in which to group the data. Researchers have noted that the selection of K is largely subjective , may be politically influenced , or completed by an analyst with expert domain knowledge  (as noted in our discussion of the Thomas Methodology).
The HBSAC working group requested that the number of Hospital Groups (K) be derived from the data itself, not explicitly predetermined prior to the clustering process nor modified after clustering is completed. However, no method or measure exists that is able to definitively answer the question, “how many clusters should the data be grouped into?”. Therefore, to complete this task in our methodology, we developed a heuristic that determines the number of Hospital Groups, integrating a statistical approach and a set of user-defined decision rules.
RSS and TSS are the residual sum of squared error and total sum of squared errors, respectively, calculated for each cluster solution in k (J(C) from Eq. 3 is equal to RSS). R 2 is an overall measure of the “fit” of the cluster solution to the original data. The incremental F statistic measures only the amount of fit gained from allowing an additional cluster in the solution, while also penalizing for adding this additional cluster. Because increasing K will almost certainly improve the R 2 of the cluster solution, incF offers a measure that incorporates both fit and K. Initial candidate solutions are selected by identifying those with local maxima in incF (all solutions where incF k > incF k−1 and incF k > incF k+1).
After the initial candidate solutions are identified, a set of decision rules is employed to select the final value of K. Again, we stress that no method or technique provides a perfectly objective answer for the “correct” or “best” value of K. During the development of the methodology, an emphasis was placed on identifying quantifiable characteristics of the overall cluster configuration and the clusters themselves that could be used as a guide for this process. The HBSAC working group offered two qualifications for a suitable Hospital Group solution, 1) that no individual Hospital Group contains more than 20 hospitals and 2) that the number of “single hospital” Hospital Groups is minimized.
The decision rules are implemented via a three-step heuristic. First, all initial candidate solutions where any single Hospital Group contains more than 20 hospitals are removed. Next, for each of the remaining solutions, the number of single hospital Hospital Groups they contain is noted. The solution(s) having the minimum number of single hospital Hospital Groups is/are retained. If multiple solutions are retained from the previous step, the final step is to choose the candidate having the maximum K from the remaining solutions.
It is important to note that the decision rules presented here were created for use in a very specific application of the clustering methodology: to determine the number of Hospital Groups in Michigan. They are presented to illustrate a solution for determining K that integrates a statistical approach with a set of user-defined decision rules. The lack of a purely statistical metric to evaluate the correct number of clusters necessarily leads to subjectivity in the choice of K. However, by incorporating the two approaches, we have attempted to offer a semi-objective process to determine the number of clusters. With that being stated, any application of this clustering methodology where different types of observations or attribute data are employed needs to fully consider the use of the output clusters. Hence, the decision rules and the heuristic can and should be modified to suit the needs of the user.
New hospital assignment
The new clustering methodology also provides a procedure to assign a new or prospective hospital to the existing set of Hospital Groups. In the Thomas Methodology, this task was accomplished re-running the entire methodology with market survey data (projected RI values for the new hospital) added as a new observation. Given the uncertainty and likely errors present in projected market surveys, we designed a method wherein a new hospital is assigned to an existing Hospital Group using only geographic location.
The geocoded location of the new hospital is required to calculate the travel distance from the new hospital to each existing hospital. These distances are placed in a 1 × n vector, which is rescaled using the maximum distance between any two hospitals in Michigan (see Input data) and arranged such that the entries are in the same order as the entries in the original travel distance matrix.
Like the Ward’s algorithm, the 2-step K-means + Ward’s algorithm produces a K × m matrix of cluster centers. The cluster centers from the Hospital Group solution are subset to only those columns corresponding to the travel distance attributes (column numbers z+1 to m), resulting in a K × n matrix. This subset represents the geographic location of the existing Hospital Group centers in n-dimensional space.
where c i is the cluster center for the Hospital Group and h i is the rescaled distance vector for the new hospital. A d value is calculated from the new location to each existing Hospital Group. The new hospital is assigned to the Hospital Group having the minimum d value.
We implemented the new Hospital Groups clustering methodology using inpatient hospitalization data from 2008 to 2010, which included 169 acute care hospitals. A small number of hospitals reported their inpatient data to the MIDB in tandem with another hospital or set of hospitals. The hospitals reporting together are owned by the same health care system and are located very near each other. Therefore, these were treated as a single observation for the purposes of clusteringd. Two hospitals did not report any patient records to the MIDB and were removed prior to clustering. The final data matrix consisted of 158 observations with 1066 attributes (CI values for 906 zip codes and rescaled travel distance to 160 hospital locations).
Initial candidate solutions
To explore the stability of the Hospital Groups provided by the methodology, we re-created a 33 Hospital Group solution using data from 2005 to 2007. This allowed us to test the resulting Hospital Groups with data from an independent time period with no overlapping years. Because a small number of hospitals closed and opened during this time frame, after clustering, the hospitals were normalized such that only hospitals open during both time periods were compared. The normalization step was completed post-clustering as to not influence the results of the 2005-2007 Hospital Group solution. Overall, the two 33 Hospital Group solutions were in agreement on 89.76% of hospitals (149 of 166 hospitals). 24 of the 33 Hospital Groups produced using the 2005-2007 data were an exact match (in both group size and hospital membership) with their counterparts from the 2008-2010 data.
Comparison to previous configuration
The overall fit of the original 64 Subarea configuration is slightly better than that of the 33 Hospital Group solution (R 2 = 0.984 vs. R 2 = 0.971). However, this is not entirely surprising, given that model fit is highly influenced the number of clusters. Further, R 2 is influenced by the number of clusters with a single observation. The 64 Subarea configuration contains 32 of these clusters, while the 33 Hospital Groups only contains one such cluster; essentially, a single hospital cluster provides a perfect “fit”.
The F statistic is more appropriate for comparison as it incorporates the model fit (R 2), while also penalizing for a larger number of clusters. We found that the 33 Hospital Group solution (F = 131.75) largely outperformed the original configuration (F = 92.86), which suggests that the new clustering methodology provides a more efficient set of Hospital Groups.
It is important to note that a direct comparison of the 64 Subarea and the 33 Hospital Group solutions can be somewhat misleading given that they were created with very disparate methods and do not have a similar number of clusters. Methods and procedures to evaluate clustering methods or algorithms generally compare cluster solutions with the same number of clusters or compare the cluster to solutions to a random clustering of observations.
Comparing the statistical fit of the 64 Subareas to the 33 Hospital Groups is not a fully appropriate approach to evaluating the new clustering methodology against the Thomas Methodology. In light of their final purpose for creating allocation units for the Michigan’s Bed Need Methodology, a more suitable evaluation is the performance of the methodologies themselves. In this, the small number of clusters produced by the Thomas Methodology, when implemented with up-to-date hospitalization data, speaks more to the overall utility of the methodology itself. Further, the application-oriented and conceptual concerns identified in the Thomas Methodology suggest that the principles of the methodology are outdated. Thus, the most basic advantage provided by the new clustering methodology is that it is theoretically valid, while also providing a usable Hospital Group solution.
Following an extensive review, the HBSAC and the state’s CON Commission recommended that the new clustering methodology for Hospital Groups be adopted into Michigan’s Hospital Bed Standards. Implementation of the new clustering methodology reduced the number of Hospital Groups in Michigan from 64 to 33. During development of the methodology, an emphasis was placed on reducing the number of single hospital Hospital Groups, thereby assuming a more regional view of community-based need than the previous configuration. In the 33 Hospital Group solution, only one Hospital Group contains a single hospital (2.86% of the groups). This result was substantially different than the former configuration wherein 50% of the 64 Subareas contained a single hospital. While the initial move toward more regional-level planning and regulation units is consistent with other states’ CON programs, the actual consequences for inpatient hospital bed distribution and access in Michigan remain to be seen. We are encouraged, however, by preliminary tests showing that the 33 Hospital Group configuration did not substantially alter predictions of the state’s future bed demand.
An issue to consider is the use of alternative or additional data for clustering hospitals in Michigan. Because the focus of this application is to define Hospital Groups for inpatient hospital bed planning, we chose only to include inpatient hospitalization data. However, other measures such as the American Hospital Association’s case-mix adjusted discharges may be explored in the future. Adjusted discharges incorporate both inpatient and outpatient hospital visits, possibly offering a more complete characterization of community health care utilization. Additionally, raw inpatient days do not provide insight into the efficacy of the hospitalizations or their overall contribution to public health . The use of inpatient hospitalization data limits the scope of the analysis. Future research exploring alternative data sources for clustering hospitals would likely prove beneficial.
Although the clustering methodology was designed for the specific purpose of creating groups of hospitals, the methodology relies upon theoretically sound and generally accepted approaches to cluster analysis. Therefore, it is highly transferable for other clustering applications. The methodology is suitable for use with a variety of data sources, places, or scales of analysis and, importantly, can be used to create small areas.
Georeferenced utilization data is the fundamental data source for the clustering methodology. Although we employed inpatient hospitalization data, the methodology does not require this specific data source. Any utilization data that can be georeferenced, separating utilization into source and destination locations, and can be converted to CI values is appropriate. These data may include, but are not limited to, outpatient visits, primary care visits, or Medicare data.
The clustering methodology is not scale dependent, nor dependent upon a specific place. Given georeferenced utilization data, the methodology will provide coherent results for any region or state. This also holds true for use in other countries, given the appropriate input data. Because the 2-step K-means + Ward’s algorithm does not require a substantial amounts of computer processing power, large datasets can be analyzed efficiently by the methodology. This provides an opportunity to expand the study domain to include multiple states or districts or to conduct a nation-wide analysis.
One of the most notable topics in health services research over the past 30 years has been the exploration of small area variation in health care utilization [21, 50], spending , and outcomes  in the US. These studies often rely on an aggregation method wherein small areas are formed by grouping disaggregated population units into larger regions based on similarity in health services use. The method implemented by Wennberg and colleagues at Dartmouth employs a simple plurality rule, grouping areal units based on a single CI value, not their overall patterns of utilization . In rural communities, this process is generally straightforward considering that much of the population’s health care needs are provided by a single facility. Because urban areas often contain a greater number of facilities, service use by any given community is often distributed similarly among facilities , complicating small area creation and/or service area definition. Using our clustering methodology, community utilization patterns can be expressed as the CI values from areal units to hospitals. The areal units could then be clustered into regions of similar hospital use, where the overall utilization patterns and location are considered. However, we note that an additional step would be required to link the clustered areas to specific hospitals or groups of hospitals using this methodology.
The goal of our new clustering methodology to create Hospital Groups was for it to be objective, replicable, and sustainable. Given the politically charged climate surrounding CON regulation in Michigan, a full recasting of the theoretical approach to cluster hospitals was no small undertaking. We believe that placing our focus on the concepts of hospital similarity and the theoretical underpinnings of the methods, rather than results, allowed for a politically objective overall methodology to emerge. In addition, we implement a heuristic that selects the final number of Hospital Groups based on desirable characteristics of the solutions instead of relying on a predefined number. The use of a heuristic does not completely remove all subjectivity from our methodology. However, by including the decision rules in the methodology, the new clustering methodology provides a level of transparency that was not present in the post-clustering modification step of the previous methodology.
Two distinct interpretations of “replicable” are fulfilled by the clustering methodology. First, by integrating the K-means and Ward’s clustering algorithms, we have effectively removed the unconstrained stochastic element associated with random starting locations in K-means. Each time the methodology is run with the same data, it will produce the same final Hospital Group solution (both the configuration of the Hospital Groups and the number of Hospital Groups). By supplying the methodology’s source code, we have provided an unambiguous representation. Further, the methodology is built upon well-known clustering algorithms allowing it be transferable to other statistical packages and applications.
We examined the sustainability of the clustering methodology by creating a 33 Hospital Group solution using hospitalization data from 2005-2007. The high level of agreement in the composition and size of the resulting Hospital Groups suggests that the methodology captures long-term community hospital utilization patterns in Michigan. Therefore, when the clustering methodology is run in the future, Hospital Group configuration will not change dramatically unless community utilization patterns have significantly changed.
We believe that the appropriate levels of consideration were given to the scientific, practical, and political concerns encountered during the developmental process. The new clustering methodology offers substantial improvement over the previous methodology, as it is unambiguously actionable and produces superior results. Furthermore, the methodology is generalizable such that it is suitable for clustering both facilities or areal units, for use with a variety of data sources, and for use within a variety of health care service applications.
aInterpreting the definition of the “home areal unit” of each hospital or cluster of hospitals in the Thomas Methodology was especially problematic. The original manuscript is quite vague in its discussion of home areal units. Unfortunately, the definition in the Hospital Bed Standards does not offer clarification. Therefore, we implemented multiple versions of the Thomas Methodology, each with a slightly different interpretation of the home areal unit. Although each produced unique results, none provided Subareas that were similar to the current configuration. The results presented in Figure 3 defined the home areal unit as the zip code in which the hospital is located. This implementation also allowed the algorithm to run until clustering was completed.
bAlthough not discussed in the manuscript, the CON approved source code contains additional steps to assign a numeric identifier to the resulting Hospital Groups based on their geographic location and bed inventory.
cBased on K N /K!  where K = 50 and N = 158.
dBecause these hospitals were each associated with a unique geographic location, their travel distance measurements were slightly dissimilar. To calculate the travel distances for the grouped set, we took the mean of the hospitals comprising the group. However, when calculating the number of “single hospital” Hospital Groups during the clustering methodology, the grouped set was not considered a single facility.
This research was supported by the Michigan Department of Community Health, Certificate of Need Program. Additionally, the authors would like to thank Dr. Bruce Pigozzi for his insightful suggestions regarding clustering methodologies and evaluation procedures.
- Ferrier G, Leleu H, Valdmanis V: The impact of CON regulation on hospital efficiency. Health Care Manag Sci. 2010, 13: 84-100. 10.1007/s10729-009-9113-z.View ArticlePubMedGoogle Scholar
- US Federal Trade Commission and US Department of Justice: Improving Health Care: A Dose of Competition. 2004, Washington, D.C: Tech. rep., US, Government Printing OfficeGoogle Scholar
- Rivers PA, Fottler MD, Younis MZ: Does certificate of need really contain hospital costs in the United States?. Health Edu J. 2007, 66 (3): 229-244. 10.1177/0017896907080127.View ArticleGoogle Scholar
- National Conference of State Legislatures: CON-certificate of need state laws. 2011, [http://www.ncsl.org/issues-research/health/con-certificate-of-need-state-laws.aspx]Google Scholar
- Bay KS, Nestman LJ: The use of bed distribution and service population indexes for hospital bed allocation. Health Serv Res. 1984, 19 (2): 141-160.PubMedPubMed CentralGoogle Scholar
- Illinois Administrative Code: Title 77, Chapter 2a, Section 1100.510. [http://www.ilga.gov/commission/jcar/admincode/077/077011000D05100R.html]
- New York’s Codes: Title 10, Volume D, Section 709.2 - Acute care facilities. [http://w3.health.state.ny.us/dbspace/NYCRR10.nsf/0/2784dafc3f4183448525677e00772b71?OpenDocument]
- North Carolina DepartmentofHealthandHumanServices: North Carolina 2012 state medical facilities plan. [http://www.ncdhhs.gov/dhsr/ncsmfp/2012/2012smfp.pdf]
- Berry Jr RE: On grouping hospitals for economic analysis. Inquiry. 1973, 10 (4): 5-12.Google Scholar
- Elayat H, Murphy B, Prabhakar N: Entropy in the hierarchical cluster analysis of hospitals. Health Serv Res. 1978, 13 (4): 395-403.PubMedPubMed CentralGoogle Scholar
- Klastorin T, Watts C: The determination of alternative hospital classifications. Health Serv Res. 1981, 16 (2): 205-220.PubMedPubMed CentralGoogle Scholar
- Klastorin TD, Watts CA: A current reappraisal of Berry’s hospital typology. Med Care. 1982, 20 (5): 441-449. 10.1097/00005650-198205000-00001.View ArticlePubMedGoogle Scholar
- Vertrees JC, Manton KG: A multivariate approach for classifying hospitals and computing blended payment rates. Med Care. 1986, 24 (4): 283-300. 10.1097/00005650-198604000-00001.View ArticlePubMedGoogle Scholar
- Dubbs NL, Bazzoli GJ, Shortell SM, Kralovec PD: Reexamining organizational configurations: an update, validation, and expansion of the taxonomy of health networks and systems. Health Serv Res. 2004, 39: 207-220. 10.1111/j.1475-6773.2004.00222.x.View ArticlePubMedPubMed CentralGoogle Scholar
- Luke RD: Taxonomy of health networks and systems: a reassessment. Health Serv Res. 2006, 41 (3p1): 618-628. 10.1111/j.1475-6773.2006.00524.x.View ArticlePubMedPubMed CentralGoogle Scholar
- Zwanziger J, Khan N: Safety-net hospitals. Med Care Res Rev. 2008, 65 (4): 478-495. 10.1177/1077558708315440.View ArticlePubMedGoogle Scholar
- Shwartz M, Payne SM, Restuccia JD, Ash AS: Does it matter how small geographic areas are constructed? ward’s algorithm versus the plurality rule. Health Serv Outcomes Res Methodol. 2001, 2: 5-18. 10.1023/A:1011463815766.View ArticleGoogle Scholar
- Goodman DC, Mick SS, Bott D, Stukel T, Chang Ch, Marth N, Poage J, Carretta HJ: Primary care service areas: a new tool for the evaluation of primary care services. Health Serv Res. 2003, 38 (1p1): 287-309. 10.1111/1475-6773.00116.View ArticlePubMedPubMed CentralGoogle Scholar
- Shortt NK, Moore A, Coombes M, Wymer C: Defining regions for locality health care planning: a multidimensional approach. Soc Sci & Med. 2005, 60 (12): 2715-2727. 10.1016/j.socscimed.2004.11.016.View ArticleGoogle Scholar
- Klauss G, Staub L, Widmer M, Busato A: Hospital service areas - a new tool for health care planning in Switzerland. BMC Health Serv Res. 2005, 5 (33): 1-15.Google Scholar
- Wennberg J, Gittelsohn A: Small area variations in health care delivery. Science. 1973, 182 (4117): 1102-1108. 10.1126/science.182.4117.1102.View ArticlePubMedGoogle Scholar
- Jain AK: Data clustering: 50 years beyond K-means. Pattern Recognit Lett. 2010, 31 (8): 651-666. 10.1016/j.patrec.2009.09.011.View ArticleGoogle Scholar
- Dubes R, Jain AK: Clustering techniques: The user’s dilemma. Pattern Recognit. 1976, 8 (4): 247-260. 10.1016/0031-3203(76)90045-5.View ArticleGoogle Scholar
- Steinley D: K-means clustering: A half-century synthesis. Br J Math Stat Psychol. 2006, 59: 1-34. 10.1348/000711005X48266.View ArticlePubMedGoogle Scholar
- Milligan GW, Cooper MC: Methodology review: clustering methods. Appl Psychol Meas. 1987, 11 (4): 329-354. 10.1177/014662168701100401.View ArticleGoogle Scholar
- Michigan Department of CommunityHealth: Certificate of Need (CON) review standards for hospital beds. 2012, [http://www.michigan.gov/documents/mdch/HB_Standards_399445_7.pdf]Google Scholar
- Meesa IR, Meeker RA, Mukherji SK: Certificate of need. Neuroimaging Clin North Am. 2012, 22 (3): 443-450. 10.1016/j.nic.2012.05.011.View ArticleGoogle Scholar
- Griffith JR: Quantitative Techniques for Hospital Planning and Control. 1972, Lexington, MA: Lexington BooksGoogle Scholar
- Thomas JW: Techniques for defining geographic boundaries for health regions. Socio-Econ Plann Sci. 1979, 13 (6): 321-326. 10.1016/0038-0121(79)90013-2.View ArticleGoogle Scholar
- Thomas JW, Griffith JR, Durance P: Defining hospital clusters and associated service communities in metropolitan areas. Socio-Econ Plann Sci. 1981, 15 (2): 45-51. 10.1016/0038-0121(81)90048-3.View ArticleGoogle Scholar
- Griffith JR, Restuccia JD, Tedeschi PJ, Wilson PA, Zuckerman HS: Measuring community hospital service in Michigan. Health Serv Res. 1981, 16 (2): 135-160.PubMedPubMed CentralGoogle Scholar
- Kocher B, Emanuel EJ: Overcoming the pricing power of hospitals. JAMA: J Am Med Assoc. 2012, 308 (12): 1213-1214. 10.1001/2012.jama.11910.View ArticleGoogle Scholar
- Carrier ER, Dowling M, Berenson RA: Hospitals’ geographic expansion in quest Of well-insured patients: will the outcome be better care, more cost Or both?. Health Affairs. 2012, 31 (4): 827-835. 10.1377/hlthaff.2011.1085.View ArticlePubMedGoogle Scholar
- Liu JJ, Bellamy GR, McCormick M: Patient bypass behavior and critical access hospitals: implications for patient retention. J Rural Health. 2007, 23: 17-24. 10.1111/j.1748-0361.2006.00063.x.View ArticlePubMedGoogle Scholar
- Langley S, Fuller S, Messina J, Shortridge A, Grady S: A methodology for projecting hospital bed need: a Michigan case study. Source Code Biol Med. 2010, 5 (4): 1-10.Google Scholar
- R Development Core Team: R: a language and environment for statistical computing. Tech. rep., Vienna, Austria 2011, [http://www.R-project.org]
- Garnick D, Luft H, Robinson J, Tetreault J: Appropriate measures of hospital market areas. Health Serv Res. 1987, 22: 69-89.PubMedPubMed CentralGoogle Scholar
- Zwanziger J, Melnick GA, Mann JM: Measures of hospital market structure: a review of the alternatives and a proposed approach. Socio-Econ Plann Sci. 1990, 24 (2): 81-95. 10.1016/0038-0121(90)90014-X.View ArticleGoogle Scholar
- Goody B: Defining rural hospital markets. Health Serv Res. 1993, 28 (2): 183-200.PubMedPubMed CentralGoogle Scholar
- Delamater PL, Messina JP, Shortridge AM, Grady SC: Measuring geographic access to health care: raster and network-based methods. Intl J Health Geogr. 2012, 11 (15): 1-18.Google Scholar
- Milligan GW, Cooper MC: A study of standardization of variables in cluster analysis. J Classif. 1988, 5 (2): 181-204. 10.1007/BF01897163.View ArticleGoogle Scholar
- Steinley D, Banks D, House L, McMorris FR, Arabie P, Gaul W: Standardizing variables in K-means clustering. Classification, Clustering, and Data Mining Applications, Studies in Classification, Data Analysis, and Knowledge Organization. 2004, Berlin Heidelberg: Springer, 53-60.View ArticleGoogle Scholar
- Hartigan JA, Wong MA: Algorithm AS 136: A K-Means clustering algorithm. J R Stat Soc. Series C (App Stat). 1979, 28: 100-108.Google Scholar
- Drineas P, Frieze A, Kannan R, Vempala S, Vinay V: Clustering large graphs via the singular value decomposition. Mach Learn. 2004, 56: 9-33.View ArticleGoogle Scholar
- Steinley D: Local optima in K-Means clustering: What you don’t know may hurt you. Psychol Methods. 2003, 8 (3): 294-304.View ArticlePubMedGoogle Scholar
- Milligan G: An examination of the effect of six types of error perturbation on fifteen clustering algorithms. Psychometrika. 1980, 45 (3): 325-342. 10.1007/BF02293907.View ArticleGoogle Scholar
- Ward JH: Hierarchical grouping to optimize an objective function. J Am Stat Assoc. 1963, 58 (301): 236-244. 10.1080/01621459.1963.10500845.View ArticleGoogle Scholar
- Gujarati DN: Basic Econometrics. 1988, New York, NY: McGraw-HillGoogle Scholar
- Thomas JW, Berki SE, Wyszewianski L, Ashcraft MLE: Classification of hospitals based on measured output: The VA system. Med Care. 1983, 21 (7): 715-733. 10.1097/00005650-198307000-00005.View ArticlePubMedGoogle Scholar
- Wennberg J: Variation in use of medicare services among regions and selected academic medical centers: is more better?. 2005, Tech. Rep. 874, The Commonwealth FundGoogle Scholar
- Fisher ES, Wennberg DE, Stukel TA, Gottlieb DJ, Lucas FL, Pinder EL: The implications of regional variations in medicare Spending. Part 1: the content, quality, and accessibility of care. Ann Intel Med. 2003, 138 (4): 273-287. 10.7326/0003-4819-138-4-200302180-00006.View ArticleGoogle Scholar
- Welch HG, Sharp SM, Gottlieb DJ, Skinner JS, Wennberg JE: Geographic variation in diagnosis frequency and risk of death among medicare beneficiaries. JAMA: J Am Med Assoc. 2011, 305 (11): 1113-1118. 10.1001/jama.2011.307.View ArticleGoogle Scholar
- Kaufman L, Rousseeuw PJ: Finding Groups in Data: An Introduction to Cluster Analysis. 2005, Hoboken, NJ: Wiley-InterscienceGoogle Scholar
- The pre-publication history for this paper can be accessed here:http://www.biomedcentral.com/1472-6963/13/333/prepub
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.